Get Started

Learn how to configure machines and hoses for efficient cleaning sessions. Also you will find more information and usage tips about valves.

Pumping Machines

Figure: In-water Mounted Vacuum Machine
              
                There are 2 machines. One of them locates on hyperbaric facility side (on the picture) and other one locates on reception side. 

                We can name them:
                Surface Mounted Machine: locates on reception side
                In-water Mounted Machine: locates on hyperbaric facility side (on the picture)

                Lifeguards and Emrill Team is responsible to set thehm up and remove. 
                SPoC is XXX.

                NOTE FOR MYSELF: learn more...

Valves

In this section you will learn details and operational tips of valves in the pool.

There are 8 valves in the pool that connected to Deep Connected Machine. You can find their location below:

Unit Description Depth Type
2 in the right sidewalk top of the pipe 12m Standard
2 in the right sidewalk bottom of the pipe 18m Standard
1 aligned with mirror 24m Standard
2 aligned with mirror 30m Standard
1 aligned with mirror 47m Standard
1 aligned with mirror 54m Standard

IMPORTANT! At least 1 valve must be open while the machine is running. If all valves are closed, the machine will be damaged.

Good Practise: Usually leave 30m valves open. The reason is these valves are using more than the others.

Valve Operation

Valve Closed
Valve Open

Hoses

difference between edges

how to setup a hose in the donut

additional eqipment for hoses

IMPORTANT! never put your finger in

IMPORTANT! never suck big items

IMPORTANT! never block suction, it will have damage machine

IMPORTANT! do not vacuum bubbles. It couses to the hose floating and create a dead space into the hose. It will effects suction power.

bends, acktangements [props, hoses]

Brushes

There are 3 different type of brushes in the XXX room at G floor

specs and when should we use them and why